|
Radiation
Detection and Identification |
|
identiFINDER2 |
The FLIR Systems (ICx
Technologies)
identiFINDER™ 2 is a logical extension of the original
identiFINDER series of handheld radioisotope identification
detector (RIID) instruments. The thousands of identiFINDERs
currently deployed worldwide have provided ICx with a
tremendous resource for suggestions and comments on how to
improve the already exceptional identiFINDER. The identiFINDER
2 is the result of these comments and suggestions.
More Information
|
|
nanoRAIDER |
With the
highest detector resolution available in a pager-sized device,
the NEW nanoRaider™ virtually eliminates the false
alarms and false positives that are so common to personal
radiation detectors. With both detection and identification
capabilities available in a single, rugged device, those on
the front lines of homeland security can trust the nanoRaider
to make their job easier.
More Information
|
|
radHUNTER
|
The radHUNTER™ is an extremely sensitive and accurate
digital hand-held gamma radionuclide identification device (RID). It
is the culmination of over eight years of development of
micro-miniature, digital signal processing electronics; operating
power conservation; and advancements in the scintillation detector,
radionuclide template matching identification algorithm. The
radHUNTER development was supported in part by the U.S. Department
of Homeland Security (DHS) / Domestic Nuclear Detection Office (DNDO),
Human Portable Radiation Detection System (HPRDS) program.
More Information
|
|
microRAIDER |
The microRaider™ is a
state-of-the-art Spectroscopic Personal Radiation Detector (SPRD)
with solid state, CZT detectors. It combines the capabilities
of a Personal Radiation Detector (PRD) with the radionuclide
identification capabilities of a Radio-Isotope Identification
Detector (RIID) into one conveniently small package. The
microRaider provides great sensitivity along with real-time,
accurate radionuclide identification.
More Information
|
|
identiFINDER |
The identiFINDER is a
user-friendly instrument that identifies man-made and natural
radionuclides and combines high sensitivity with a wide dose
rate range. The instrument has a dual purpose design to
facilitate locating missing or offending sources and then
identifying the source via its gamma spectrometry and nuclide
identification capability. The identiFINDER is a complete
digital gamma spectroscopy and dose rate system.
It integrates multi-channel analyzer, amplifier, high voltage
power supply, and memory with an integral scintillation and GM
detector.
More Information
|
|
Raider
|
The Radiation Raider is a state-of-the-art
handheld instrument in a class of its own. It uniquely meets or
exceeds the performance requirements of
ANSI
N42-34 (RIID)
and ANSI
N42-48 (SPRD) standards. The instrument utilizes an innovative array
of solid-state CZT detectors and (optional) He3 tubes to provide
superior gamma and neutron sensitivities resulting in a rapid
identification and verification of radioactive materials.
More Information
|
|
STRIDE 300
|
The
STRIDE Series 300 stanchion detection units have been
designed primarily for pedestrian security installations. The
stanchion detection unit looks and works exactly the same as a
standard crowd control stanchion. It has an extendable belt on top,
the post and a weighted base. These units are available in wired or
wireless versions.
More Information
|
|
dsciSPEC
|
The dsciSPEC digital spectrometer was
designed to meet the challenging needs of remote monitoring with a
wide range of scintillation detectors. This complete gamma
spectrometer signal processing system is ideal for large area and
environmental monitoring networks.
More Information
|
|
scinti SPEC
|
The scintiSPEC™ universal multi-channel
analyzer (MCA) was designed for scintillation detector spectroscopy
and counting. The system provides a complete, traditional
spectroscopy electronics system with power and communications via a
USB interface.
More Information
|
|
|
|
Chemical & Explosives
Detection |
|
FIDO Verdict |
The
Fido® Verdict™ is a small, lightweight
and ruggedized instrument for rapidly identifying suspicious
liquids, solids and powdered materials. Designed specifically to
identify the explosives, liquid threats and narcotics commonly
listed by the ATF and DEA, Verdict now allows military and law
enforcement officials to do field-based analysis and evidence
prioritization.
More Information
|
|
C learPoint |
ClearPoint™ is a desktop implementation of the Fido
Verdict™. By incorporating a radically different
sampling approach and user software written from the ground up
to support bottled liquid screening, ClearPoint significantly
improves operator efficiency and reduces the possibility of
operator error. Additionally, proprietary signal analysis
algorithms minimize the impact of fluorescence and noise in
acquired Raman spectra to reduce false alarm rates below the
level obtainable by standard correlation analysis.
More Information
|
|
Fido NXT |
Completely redesigned from the ground up, the
lightweight and rugged new Fido® NXT delivers fast, accurate and
consistent explosives detection capabilities for combat, physical
security and anti-terrorism operations. The expanded detection
capabilities and reduced size of the Fido NXT enables the system to
be easily integrated into existing security measures.
More Information
|
|
Fido XT |
Based on a
breakthrough detection technology, the combat proven Fido ®
XT is currently in use throughout Iraq and
Afghanistan. Unlike other systems, the Fido uses a polymer-based
technology to achieve better and faster detection results. This
innovative material provides an immediate response before rapidly
resetting for continued screening operations.
More Information
|
|
Fido On-Board |
The Fido®
OnBoard; A proven robot-mountable explosives detection system on
the market. Due to the dramatic impact the threat of explosive
devices has on media coverage and public sentiment, explosives
continue to be a favored weapon of terror and destruction. In many
scenarios, a person is required to come in close proximity with a
potential explosive device before accurate detection and
verification can take place. Enhancing a robot with explosive
detection capabilities will keep personnel out of harm’s way.
More Information
|
|
Fido PaxPoint |
The Fido ®
PaxPoint™ is a handheld,
portable liquid screening system capable of detecting liquids used
in making explosive devices. The instrument, which weighs less than
four pounds, is capable of quickly screening passengers, baggage,
sealed containers and bottles for potential threats. The Fido
PaxPoint provides acute sensitivity in a rugged device suitable for
sustained use in an operational environment.
More Information
|
|
Griffin
400 |
The
Griffin 400 gas chromatograph/mass spectrometer (GC/MS)
offers high-performance detection, identification,
quantitation and confirmation for a broad range of compounds
of interest. Specifically, the Griffin 400 is capable of
confirming the presence of illicit drugs, explosives, chemical
warfare agents (CWAs), industrial chemicals and organic
compounds, including both volatile and semi-volatile
components. In addition, the Griffin 400 supports a number of
flexible sample introduction options.
More Information
|
|
AgentAce
CAD-KIT
|
The Agentase™ CAD-KIT provides first
responders with the ability to conduct surface, solid and liquid
interrogation of nerve (G&V series), blood (AC) and blister
(HD) agents, acids, bases, aldehydes and oxidizers. This kit provides accurate results in field
environments, improves detection limits to rival those of expensive
handheld electronic testing devices and provides fast signals that
are easy to interpret.
More Information
|
|
AgentAce
Disclosure Spray
|
The AgentAce Disclosure Spray was
developed by Flir in response to requests from several users of
the Agentase™ CAD-KIT. It is a spray-based formulation that changes color in the exact
location of agents on surfaces.
More Information
|
|
AgentAce
HRK KIT
|
The Agentase™ Hospital Readiness Kit (HRK)
provides both pre- and post- decontamination detection for chemical
warfare agents and toxic industrial chemicals. Providing hospital
responders with the tools to detect the presence of harmful chemical
agents before they contaminate the hospital.
More Information
|
|
|
|
|
Bio Sampling and Sensors |
|
B ioCapture |
The BioCapture® 650 was designed for first
responders working in unfamiliar, challenging and dangerous
environments. We know that emergency situations are no place for
chemistry set-ups and delicate instrumentation. The BioCapture is
cutting edge air sampling technology packed in a rugged, lightweight
package. Large single button operation means responders can
quickly execute the sampling mission and proceed to other
objectives.
More Information
|
|
B ioBadge
100 |
The
BioBadge ® 100 air sampler is
a portable battery operated system that effectively collects
airborne biological particles when present in persistent but very
low concentration levels. Similar in size to a cellular phone, the
BioBadge is small and lightweight enough to be worn by an individual
for monitoring exposure to biological organisms or placed discreetly
in an area suspect of contamination.
More Information
|
|
B ioXC 200GX |
The BioXC ™
200GX is an affordable approach to
continuous or triggered bio-threat sampling. It is designed for
seamless integration with the Cepheid GeneXpert®
presumptive identifier. The innovative design of the
BioXC eliminates the need to transfer samples from a collection vial
or cartridge into the GeneXpert cartridge, significantly reducing
risk of inadvertent human exposure and reaerosolization of
concentrated pathogens.
More Information
|
|
AirSentinel 1000B
|
The
AirSentinel ® 1000B is a
continuously-operating sensor that functions like a smoke detector
for potentially harmful airborne biological threats. The AirSentinel
1000B facilitates the process of identifying bioterror agents to
allow timely containment, treatment and remediation.
More Information
|
|
C100
Tactical Collector
|
The C100™
Modular Tactical Collector is designed for field collection of
bioaerosols. The collector utilizes a semi-automated rinse process
which yields a 6 ml aqueous sample for field and laboratory
analysis. The C100 is intended for use as a stand-alone
collector when mounted on a base module or as a component within a
modularly-integrated system that would also include detection and
identification components. It can be mounted directly on the IBAC™
Bioaerosol Detector.
More Information
|
|
IBAC
|
The IBAC ™
is a real-time continuously operating indoor or
outdoor monitor that provides early warning of biological aerosol
threats. The IBAC facilitates the process of identifying bio-terror
agents to allow timely containment, treatment and remediation.
Monitors are designed to detect concentrated levels of biological
aerosols. Possible agents released in a bio-threat attack can
include bacterial spores (such as B. anthracis, which causes
anthrax), bacteria (such as Y. pestis, which causes plague),
viruses (such as smallpox) or toxins (such as ricin).
More Information
|
|
|
|
|
|
*NOTE: Many of the documents are in PDF format - if you do not have Adobe Acrobat Reader,
click here to get it.
|
|
