LAURUS Systems Technology Partner

High and Low Volume Air Sampling Equipment

       For Emergency Response, Nuclear, Medical, and Laboratories

 

H-809 V	The Model H-809V is a lightweight rugged grab sampler  designed specifically for heavy duty industrial applications sampling airborne particulates or combination particulates and radioiodine.  The Model H-809V may be used with RADēCO sample holders that house selected filter discs and high quality RADēCO radioiodine cartridges.  The unit may be re-calibrated using one of the RADēCO NIST traceable Air Flow Calibrators (sold separately) to give the user a fully qualified air sampling system. More Information
H-809-C	The Model H-809C is a lightweight GRAB sampler designed for sampling airborne particulates or combination particulates and iodines in the field using a motorized vehicle or RADēCO’s Portable 12/24VDC Power Supply. The H-809C is supplied with a battery jumper type cable with large alligator clamps for connecting directly to battery terminals. RADēCO precision machined aluminum sample holders, selected filter discs, and high quality radioiodine cartridges can be used with a RADēCO NIST traceable air flow calibrator to give the user a fully qualified air sampling system. More Information
AVS-28A	The Model AVS-28A Portable Constant Flow Air Sampler is a continuous duty, constant flow device. It can be used with filters and cartridges in the collection of airborne contaminates, or as a regulated, positive displacement vacuum supply for continuous air monitors and stack sampling systems. The ability of the AVS-28A to maintain a preset sample flow rate is controlled by the unique side-mounted regulator valve. The RADēCO regulator valve is not a bypass design, and therefore the exhaust contains only sampled air.   More Information
H-810	The RADēCO™ Model H-810 is a dependable, lightweight high volume air sampler which incorporates the reliability of the Model H-809V with an Air Volume Totalizer. This microprocessor based unit is designed to eliminate the use of rotometers and mechanical time meters, simplifying air sampling procedures while adding significantly higher accuracy to air sampling data.  The Air Volume Totalizer portion of the sampler is composed of an enclosed air-turbine which rotates at speeds proportional to the air velocity of the sampled air. The turbine’s rotation is sensed by a reflective sensor/breaker disk. The microprocessor converts the signal to volume and displays the flow rate, total volume, and elapsed time on the LCD readout.   More Information
H-811	The RADēCO Model H-811 AC/DC is a dependable, lightweight high volume air sampler which can operate off 12 or 24VDC as well as 120 VAC. This microprocessor based high volume air sampler will operate virtually anywhere. The unit has a slip connector for powering off a car battery or a RADeCO RAD1224 Battery Pack as well as a removable AC power cord for when line power is available. This one unit can replace up to 6 air samplers. Three AC units with different calibrations and three DC units with three different calibrations. More Information
Calibrators	RADēCO Air Flow Calibrators are the most durable and repeatable calibration devices available. The RADēCO calibrators are constructed of a precision machined aluminum venturi tube.  The C-Series (analog) employs an appropriately ranged magnehelic gauge while the D-Series uses an appropriately ranged intelligent digital meter, both mounted in rugged steel cases.  Simple, cost effective and consistently accurate year after year.  More Information
RAD-Pro 5	The RADēCO RAD-Pro 5 personal air sampler (lapel sampler) is an industry leader in back-pressure performance, reliability and ease-of-use. This pump offers flow rates up to 5 LPM respectively. And thanks to several advanced features, this pump over-comes the main causes of sampling errors – saving you time and money. More Information
Air Sampler Kits	Full air sampling kits are also available. Click on the link below for complete information or contact us.  Each Kit includes the following: Air Sampler, choose from H-809, H-809C, H-810, H-810DC, H-811AC/DC Open Face Combo Filter Holder C812 Air Flow Calibrator 2500-80 Calibrator Adapter RAD12/24 VDC-Battery Pack-If Required CP100 Radioiodine Cartridge 2" LB5211 Filter Paper More Information
Air Force Kit	In 2003 RADēCO was selected by the United States Air Force as their supplier of Emergency Response air sampling equipment. Since then, RADēCO has provided the USAF with over 500 complete air sampling kits, composed of calibrators, filter media, sample holders and air samplers. These kits have been distributed to Air Force bases around the globe and we continue to support and supply the USAF with quality service and equipment More Information
Air Force Kit Soft Case	Unlike the heavy and cumbersome Pelican Case, the SC-1 Transport Case was specifically designed for use with the USAF Air Sampling Kit. The SC-1 allows responders to store their air sampler attached to the TRP-2 Tripod, enabling responders to vastly improve their response time. There are also internal pockets for storage of the 2500-25A filter holder and 0750-49 filter paper. More Information
Tripod TRP-2	The TRP-2 is a survey style Tripod which provides telescoping legs for varying sampling heights. The feet are rugged steel with sharp point for a solid gripping on a variety of surfaces.  Constructed of lightweight Aluminum for ease- of portability with a solid cast aluminum head for years of reliability.  The TRP-2 works with either the H-809 Series or the H-810 series of High Volume Grab Samplers. When ordering please specify which unit it will be used so the appropriate adapter plate/block can be provided.  Constructed of lightweight Aluminum for ease- of portability with a solid cast aluminum head for years of reliability.   More Information
H-29A	The Model HD-29A is a mobile “K-Flow” lightweight, constant flow air sampler designed for use in facilities where the collection of precise air samples is required on a continuous or semi-continuous basis. Its vacuum pump and constant air flow regulator combination permits the collection of an air particulate sample at a constant flow rate until the ΔP across the filter paper exceeds the capability of the pump at that flow rate.   More Information
H-66A	The Model HD-66A is a mobile “K-Flow” constant flow air sampler designed for use in nuclear power plants, research laboratories, production areas, and throughout industrial facilities where the collection of precise air samples is required on a continuous or semi-continuous basis. Its heavy duty vacuum pump and constant air flow regulator combination permits the collection of an air particulate sample at a constant flow rate until the ΔP across the filter paper exceeds the capability of the pump at that flow rate. (See datasheet)   More Information
Filter Holders	RADēCO™ has available the finest line of precision machined, all aluminum, holders for air sampling media. There are four different types of holders: (1) Open Face Filter Holder, (2) Inline Filter Holder, (3) Open Face Combination Filter and Cartridge Holder, and (4) Inline Combination Filter and Cartridge Holder. All four types are available for the RADēCO H809, H810, HD and AVS series of air samplers as well as for other manufacturers models.   More Information
12/24 Battery Pack	For Emergency Response or routine sampling the 12/24 Batter Pack provides enough power for a wide variety of situations.  It includes a heavy duty cable and slip connector or jumper cable clamps and is p0wered by two 12 volt sealed, lead-acid batteries.  The 12 volt systems use the batteries in parallel and the 24 volt system in series.  The DC outlet can power a variety of 12 volt accessories.   More Information
*NOTE: Many of the documents are in PDF format - if you do not have Adobe Acrobat Reader, click here to get it.