|
rad-D™
|
The rad-D is a fixed-position radiation detector that is used to
monitor doorways, driveways, or loading docks. It can inspect
pack-ages or luggage on conveyor belts; and it can be integrated
with an X-ray machine or a metal detector to increase the kinds
of dangers detected. The rad-D can also be easily connected to
an existing security system – to add radiation to the other
types of alarms. The rad-D is small. It can be attached to
walls, light poles, convey-or belts, or X-ray machines. And because
it is small, it doesn’t affect the flow of vehicles or pedestrians
under inspection.
More Information
|
|
rad-D PRM
|
The exclusive rad-D PRM Mounting System makes
installation of the rad-D very simple and straight forward.
The PRM gives the detecting unit full directional adjustment
capability. It can be mounted permanently to most surfaces
or with our extremely robust magnet configuration, the unit can
be affixed to any metal surface and then be transported to other
locations for added flexibility. The PRM is the ideal
solution for X-ray machines and package scanning
More Information
|
|
TPM-903B |
The TPM-903B
is designed for rapid screening of personnel in the event of a
radiation release. It provides early warning of hot spots, eg.
On protective clothing, and has design features suited for
monitoring radiation workers, vehicles or the public. The
TPM-903B is lightweight and mobile to facilitate transport to
its location, where it is easily installed within seconds. In
use, the aperture accommodates walkers or wheelchairs, and can
be adjusted to also accommodate vehicles.
More Information
|
|
CRICKET |
The
Cricket radiation detection system is
designed
specifically to meet the needs of the scrap, steel and waste
industries.
The Cricket’s revolutionary, yet simple design provides an optimum
level of detection capability for low
intensity
radioactive sources, on a continuous basis, in applications where
radiation detection systems have never
existed
before. The level of detection capability will far exceed any
conventional radiation detection system,
including
detection systems that are mounted on the boom of a crane,
regardless of the detector size.
More Information
|
|
Mini Rad-V
|
Recognizing elevated radiation levels and
detecting radioactive materials has never been easier. The ultra
sensitive Mini Rad-V vehicle mounted radiation
detector takes the proven performance and reliability of the
Mini Rad-D
and Rad-D technology to new levels for
first responders and those concerned with discovering unwanted
radioactive materials.
More Information
|
|
RC4000
|
The RC4000
Series of radiation detection systems have been specifically
designed to detect radioactive materials contained in a moving
vehicle loaded with scrap material. The system design is modular,
flexible and customizable, offering multiple detector configurations
to meet site specific applications. The RC4000 incorporates only the
highest quality of components and software/hardware technology
available today.
More Information
|
|
RC2000
|
The
RC2000 Series provides an extremely high degree of
detection capability for a wide range of radioactive elements
commonly associated with scrap metal. The RC2000 Series utilizes
proven signal processing alarm algorithms with a large volume of
high grade specially prepared scintillation material. The detection
system then incorporates a dual detector arrangement with high gain,
low noise, photo multiplier tubes (PMT’s) and infrared vehicle
presence sensors that enable the system to better focus on the
specific background radiation levels as the vehicle travels between
the detector panels.
More Information
|
|
RC1000 |
The RC1000
Radiation Detection System is an entry level radiation monitoring
system specifically designed to detect radioactive material
contained in a moving vehicle loaded with waste, scrap, or recycled
material. It provides radiation detection for the waste handler who
wants a system that is very easy to use and can be manually adjusted
to select the best sensitivity level depending on the application.
It outperforms the competition in terms of durability and detector
sensitivity and provides all the necessary information and warning
indicators to maximize radiation detection capability with minimal
operator training.
More Information
|
|
STRIDE 300
|
The
STRIDE Series 300 stanchion detection units have been
designed primarily for pedestrian security installations. The
stanchion detection unit looks and works exactly the same as a
standard crowd control stanchion. It has an extendable belt on top,
the post and a weighted base. These units are available in wired or
wireless versions.
More Information
|
|
RadEye Area
Monitor
|
The wall mounted
RadEye Area Monitor extends the application range to convenient
and cost-effective gamma and neutron area monitoring. In case of
exceeding a preset threshold the system sets off an audible/optical
alarm and the RadEye can be immediately used as a portable
instrument. Area Monitor and flexible handheld instrument in one
with no additional handheld instrument for locating the source is
necessary.
More Information
|
|
DRM-1 |
The DRM-1
is a compact area radiation monitoring system offering
unparalleled features for stand-alone or wireless area
monitoring. The DRM is a portable or fixed position device for
monitoring of perimeters or boundaries and quickly identify
changing radiological conditions. With enhanced sensitivity,
the DRM-1D provides is ideal for radiological monitoring in
medical facility emergency rooms, incident site
decontamination tents, etc. The versatility of the DRM
provides for easy deployment on emergency response vehicles.
The DRM can be configured for wireless (FHSS) transmission of
radiological data or other communication process (air card,
satellite, GPS, etc)
More
Information
|
|
DRM-2 |
The DRM-2
is a compact, all-in-one area radiation monitoring system
with display and alarm indicators. The DRM-2 offers
unparalleled features for a stand-alone, TCP/IP networked
(optional) or wireless area monitoring solutions. The DRM is a
portable or fixed position device for monitoring of perimeters
or boundaries and quickly identify changing radiological
conditions. With enhanced sensitivity, the DRM-1D provides is
ideal for radiological monitoring in medical facility
emergency rooms, incident site decontamination tents, etc.
The versatility of the DRM provides for easy deployment on
emergency response vehicles.
More Information
|
|
AMP 50 |
The AMP-50 provides real-time remote radiological monitoring. Local readout of hand-held meter allows for use as a portable
survey instrument. The AMP-50 is designed specifically to be used in medium to low dose rate fields. The AMP-50 features linear response from 10 μR/h to 4 R/h (0.1 μSv/hr to 40 mSv/hr).
More Information
|
|
|
|
|
AMP 100 |
The AMP-100 provides real-time
remote radiological monitoring. Local readout of hand-held
meter allows for use
as a portable survey instrument.
The AMP-100 is
designed specifically to be used in high dose rate fields. The
AMP-100 features linear response from 0.5 mR/h to 1000 mR/h
(0.5 msv/hr to 10 sv/hr).
More Information
|
|
|
|
|
AMP 200 |
The AMP-200 provides real-time remote
radiological monitoring. Local readout of hand-held meter
allows for use
as a portable survey instrument.
The AMP-200 is
designed specifically to be used in high dose rate fields. The
AMP-200 features linear response from 5 R/hr to 10,000 R/hr
(0.5 msv/hr to 100 sv/hr).
More Information
|
|
SPIR-Detect |
The SPIR-Detect
is a new concept for site or
critical infrastructure protection against radiological
threat, like intrusion of special nuclear materials (SNM) or
radiological dispersion devices (RDD). Based on a network of
sensitive gamma/neutron detectors, that can be mobile, or
permanently or temporary installed, the system features a
discrete and centralized survey of access points, inside
buildings or outside. SPIR-Detect is the perfect solution
for people or luggage checking in airports, railway stations
and in sensitive places during special events (e.g. sports or
cultural).
More Information
|
|
SPIR-Ident |
Site Protection Against
Intrusion of Radioactive Material (SPIR) The SPIR–Ident
Pedestrian is highly advanced and a new concept for site
or critical infrastructure protection against radiological
threats, such intrusion of special nuclear materials (SNM) or
radiological dispersion devices (RDD). The SPIR-Ident
pedestrian portal is intended for dynamic mode detection and
identification (for pedestrian passage through the detection
volume). It can be configured for use with or without an
occupancy detector and ancillary cameras.
More
Information
|
|
RTM 870/871 |
The RTM870 PRE
monitors the parts of the body most likely to be contaminated
- it is easy to use and employs a user-friendly guidance
system with a video display and voice prompts. The design and
features of the Rados RTM870 PRE Body Monitor make it an
effective, secure and safe contamination monitor for
personnel. It enables high throughput of personnel leaving a
controlled area, while providing accurate, clear results that
are available locally and at a central control point.
More Information
|
|
VM 250/AG
|
These monitors are designed to
automatically scan vehicular traffic without the need for
frequent calibration. They are intended for applications where
the relatively low energy emissions from 235U and 239Pu are
the main concern. They are currently in use in installations
such as uranium enrichment plants, weapons manufacturing and
storage plants, nuclear laboratories, and nuclear waste
disposal and storage sites where protection of SNM is
essential. The units can be insulated, heated and/or cooled
for use in severe environmental conditions.
The VM-250 System
normally consists of two, self contained, weather resistant
pillars placed on either side of the entrance to be protected.
Each pillar contains two plastic scintillation detectors, an
occupancy detector, and an amplifier/controller. The master
pillar also has a battery and power supply/battery charger.
The VM-375 system is essentially a VM-250 with a
third pillar positioned horizontally between the two upright
pillars. The third pillar can be mounted above or below the
other pillars. The VM-375 provides improved sensitivity
over the VM-250. Please contact
LAURUS to discuss
configuration and requirements for VM-375 systems.
More Information
|
|
SPIR-Ident |
The
SPIR–Ident
Vehicle Portal
is the most advanced detector of the SPIR family, and a new
concept for site or critical infrastructure protection against
radiological threats, such intrusion of special nuclear
materials (SNM) or radiological dispersion devices (RDD). The
SPIR-Ident vehicle portal is intended for secondary screening
as a compliment to plastic scintillation-based detection
portals. The SPIR-Ident provides a cost and performance
effective solution and alternative to dynamic «ASP’s» for
vehicles and containers.
More Information
|
|
RTM 910 |
The RTM 910 is a
flexible system for the monitoring of vehicles, packages and
people for radioactive materials and contamination under all
environmental conditions. It is based on proven modules using
the most modern technology, assuring accurate and reliable
results. The RTM 910 was also designed for simple and easy
use and maintenance. Installation can be performed without
any special training or knowledge and the instructions are
supported by computer software. System operation is also
computer-controlled and user-friendly.
More Information
|
|
TM-850 |
The TM-850 is designed
to automatically scan railroad traffic without the need for
frequent calibration. t is intended for applications
wherethe relatively low energy emissions from 235U and 239Pu
are the main concern. TM-850 consists of two self-contained,
weather resistant pillars placed on either side of the
railroad track to be monitored. Each pillar contains two
plastic scintillator detectors, four neutron detector blocks,
occupancy sensors, and an SCA-775 amplifier/controller.
More Information
|
|
XRT-260 |
The TSA package
portal monitor, model XRT-260, is a highly reliable
system for radiometric protection of special nuclear material
(SNM). The package monitor system consists of two pillars
which contain the sub-system modules. The pillars are mounted
on either side of the conveyor belt. The pillars use lead
shielding on the rear and sides of the detectors to reduce the
background radiation and increase the ability of the system to
detect SNM passing between the pillars.
More Information
|
|
|
|
|
|
|
|
|
*NOTE: Many of the documents are in PDF format - if you do not have Adobe Acrobat Reader,
click here to get it.
|
|
