|
|
|||||||||||||||||
 |
|
||||||||||||||||
|
Survey Instruments and Handhelds
|
|||||||||||||||||
|
|
|||||||||||||||||
|
|
|
||||||||||||||||
|
Survey Instruments and Handhelds
|
|||||||||||||||||
|
Rados Survey Instruments
|
|
|
RDS-30
|
The RDS-30 Radiation Survey Meter is a versatile gamma radiation detector which has been designed for a wide range of applications involving a possibility for abnormal radiation levels. Compact, lightweight, waterproof, it’s performance and it’s user friendly interface make the RDS-30perfectly suited to radiation survey in field conditions as in nuclear industry or for protection against radiological hazards.
|
|
RDS-80 |
The RDS-80 Surface Contamination Meter is a rugged, versatile contamination instrument designed for a wide range of radiation detection applications. It is suitable for use in the nuclear industry, emergency response, interdiction operations or any environment where the possibility exists for abnormal contamination levels to be present. The unit combines contamination detection measurement with alarm functions and automatic conversion to activity values. Additionally, there is a surface contamination measurement histogram stored in the meter’s internal memory (external accessories required for downloading the data into a PC via IrDA port).
|
 RDS-110 |
The RDS-110 is a robust and rugged survey meter that is ideally suited for harsh applications such as Military, Fire and Emergency Responders and Civil Engineering environments. With the built in GM detector, the RDS-110 offers a wide range measurement capability. Simple to use, with LED indication of the range and a large easy to read LCD display with back-light, it does not require any set-up before use, as it performs it’s own self diagnostic test.
|
 RDS-200 |
The RDS-200 is designed for use where accurate dose rate measurements at low dose rate levels is of importance. The instant dose rate display of the instrument continuously calculates the rolling average of the last five (user selectable) minutes dose rate value which at any time can be displayed by pressing a button. The average values will also be stored into the internal memory (up to 864 values) and can be downloaded from the RDS-200 to a PC via serial line. The data transmission protocol with telephone modem or ethernet connection allows the use of RDS-200 as a detector in an area monitoring system. The protocol is compatible with the RADOS AAM-system software. Optionally a range of GM Tube-based external probes is available for gamma and beta contamination measurement. These probes simply plug into the base of the unit and the RDS-200 automatically sets up the instrument for the relevant measuring range and unit.
|
|
Rados Probes |
Click here for a description of the Probes available for the RADOS Survey Instruments
|
|
|
|
|
|
|
|
RAM R-200 |
The RAM-R-200 is a portable gamma meter designed for measuring wide range gamma radiation fields. Measurements are received by two internal energy compensated GM tubes and external probes: For beta gamma contamination (RG-10, RG-12), for high gamma fields (RG-40), and for Alpha contamination (PA-100M). The RAM R-200 can be used with a four-segment sturdy telescopic rod for the external gamma probe. The RAM R-200 meter and its external detectors include embedded microprocessors, data memory, and data communication. An audible indication is activated either by frequency fluctuations in accordance with the field strength or chirp for each measured pulse. The RAM R-200’s auto-ranging meter utilizes a combination display consisting of a smoothed digital readout for minimum fluctuations, and a two-decade analog bar graph for fast response.
|
|
|
|
|
|
|
|
The Inspector |
The Inspector is a small, handheld microprocessor-based instrument which offers excellent sensitivity to low levels of alpha, beta, gamma, and x-rays. The digital readout is displayed with a red count light and a beeper sounds with each count detected. Other features include an adjustable timer and external calibration controls.
|
|
Inspector EXP |
The Inspector EXP was designed for the requirements of emergency response personnel. It has the same valuable features, small size, and quality of the Inspector, but instead of the built-in detector, it has the added versatility of an external probe.
|
|
Abacus |
The Abacus is a handheld, digital radiation detection device that enables you to complete your surveys automatically with your Abacus and a Windows Mobile™, Palm™ Pilot or Windows™ Computer. Not only does it offer excellent sensitivity to low levels of alpha, gamma, and x-rays, but the internal "guard" detector automatically performs gamma subtraction from the "pancake" detector for unprecedented beta sensitivity. The software can display a variety of units for a wide array of applications, take timed counts, control the audio of each tube, and save your surveys for easy analysis and sharing, all wirelessly with Bluetooth® right to your computer! The Abacus also has a red count light, a beeper sound and selectable alarm thresholds for quick assessments.
|
|
MC1-K |
The MC1K is a handheld survey meter using a built-in energy compensated GM detector. It detects gamma and x-rays up to 1000 mR/hr over 4 selectable ranges. A beep sounds and a count light flashes with each event detected.
|
|
Monitor 4 & 4EC |
The MONITOR 4 and MONITOR 4EC are compact, general purpose survey meters capable of detecting alpha, beta, gamma, and x-rays over 3 selectable ranges. A red count light flashes and a beep sounds with each event detected. The Monitor 4EC offers a more accurate linear reading for gamma and x-rays (above 40 keV).
|
|
Digilert 100 |
The Digilert 100 measures alpha, beta, gamma, and x-rays. Its digital display shows readings in your choice of counts per minute (CPM) or mR/hr, or in accumulated counts. A red LED flashes and beeper sounds with each count detected. An audible alert sounds when the radiation reaches a user set alert level.
|
|
|
|
|
|
|
|
RAP Probes |
AP47, RAP200, and RAP640 Scintillation Probes
The CsI (Tl) crystal used in Radiation Alert® Probes has a higher atomic number, is more rugged, and less hygroscopic than a typical Nal detector. The improved gamma ray absorption allows a thinner crystal to be used, effectively reducing the background count rate. (For use with Gateman only).
RAP47: Optimized for high sensitivity to low energy gamma radiation. It is ideal for the 47 keV, the typical energy of lead 210 and 35 keV, the typical energy of Iodine-125.
RAP200: Optimized for 185 keV, the ypical energy of U-235.
NEW RAP640: Optimized for high energy gamma.
|
|
Observer Software
|
The Observer Software runs on a Windows platform and can be used
with the Inspector, Digilert 50 and Geiger Radiation Monitors. As an
option, any of our Radiation Alert® instruments can be modified to
interface with the Observer.
|
|
CDV-700RP- Replacement Probe |
The CDV-700RP probe is specifically designed to have greater sensitivity and easily replace the existing beta/gamma probe on the CDV-700 survey meter. No modification is required! The grip on the probe is adjustable to allow for the perfect fit to Victoreen or Lionel meters. Just unplug the existing probe and plug in the CDV-700RP. (For use with CDV-700 meters only).
|
|
|
|
|
|
|
|
PRM-470B Handheld Gamma Detector |
The hand-held PRM-470B is a popular choice for locating radioactive sources and measuring intensity in the field. It uses low power CMOS electronics to provide over 60 hours operation from the NiCad batteries. For emergency response or other applications where rechargeable batteries are not suitable, the PRM-470B can be powered by an optional 4 "AA" alkaline batteries. These batteries provide more than 24 hours of continuous service. The versatile, easy-to-operate PRM-470B also features a self-test during power-up, automatic background count and user-determined alarm settings.
|
 |
|
|
Contact:
LAURUS Systems
|
|
