RADēCO

Air Force Kit

Excerpt - In 2003 RADēCO was selected by the United States Air Force as their supplier of Emergency Response air sampling equipment. Since then, RADēCO has provided the USAF with over 500 complete air sampling kits (H-809VII AF Kit), composed of calibrators, filter media, sample holders and air samplers. These kits have been distributed to Air Force bases around the globe and we continue to support and supply the USAF with quality service and equipment.

Air Force Kit Soft Case

Excerpt - Unlike the heavy and cumbersome Pelican Case, the SC-1 Transport Case was specifically designed for use with the USAF Air Sampling Kit. The SC-1 allows responders to store their air sampler attached to the TRP-2 Tripod, enabling responders to vastly improve their response time. There are also internal pockets for storage of the 2500-25A filter holder and 0750-49 filter paper.

Air Sampler Kits

Excerpt - Full air sampling kits are also available. Click on the link below for complete information or contact us. Each Kit includes the following:

• Air Sampler, choose from H-809, H-809C, H-810, H-810DC, H-811AC/DC
• Open Face Combo Filter Holder
• C812 Air Flow Calibrator
• 2500-80 Calibrator Adapter
• RAD12/24 VDC-Battery Pack-If Required
• CP100 Radioiodine Cartridge
• 2" LB5211 Filter Paper

AVS-28A Air Sampler

Excerpt - The Model AVS-28A Portable Constant Flow Air Sampler is a continuous duty, constant flow device. It can be used with filters and cartridges in the collection of airborne contaminates, or as a regulated, positive displacement vacuum supply for continuous air monitors and stack sampling systems.  The ability of the AVS-28A to maintain a preset sample flow rate is controlled by the unique side-mounted regulator valve. The RADēCO regulator valve is not a bypass design, and therefore the exhaust contains only sampled air. The AVS-28A has the superior ability to compensate for added ΔP across sampling media.

Calibrators

Excerpt - RADēCO Air Flow Calibrators are the most durable and repeatable calibration devices available. The RADēCO calibrators are constructed of a precision machined aluminum venturi tube. The C-Series (analog) employs an appropriately ranged magnehelic gauge while the D-Series uses an appropriately ranged intelligent digital meter, both mounted in rugged steel cases. Simple, cost effective and consistently accurate year after year.

H-809 V

Excerpt - The Model H-809V is a lightweight rugged grab sampler designed specifically for heavy duty industrial applications sampling airborne particulates or combination particulates and radioiodine. The Model H-809V may be used with RADēCO sample holders that house selected filter discs and high quality RADēCO radioiodine cartridges. The unit may be re-calibrated using one of the RADēCO NIST traceable Air Flow Calibrators (sold separately) to give the user a fully qualified air sampling system.

H-810

Excerpt - The RADēCO™ Model H-810 is a dependable, lightweight high volume air sampler which incorporates the reliability of the Model H-809V with an Air Volume Totalizer. This microprocessor based unit is designed to eliminate the use of rotometers and mechanical time meters, simplifying air sampling procedures while adding significantly higher accuracy to air sampling data. The Air Volume Totalizer portion of the sampler is composed of an enclosed air-turbine which rotates at speeds proportional to the air velocity of the sampled air. The turbine’s rotation is sensed by a reflective sensor/breaker disk. The microprocessor converts the signal to volume and displays the flow rate, total volume, and elapsed time on the LCD readout.

H-810BL

Excerpt - The RADēCO™ Model H-810BL (Brushless) is a ruggedized, maintenance free and continuous version of the popular H-810AC. The H-810BL is designed to meet a variety of military standards and for use in extreme environments. This microprocessor based unit has our unique aluminum Tough Screen. The Tough Screen has no moving parts or buttons and operates like a touch screen phone only made of 1/4 inch thick aluminum with a polycarbonate display window. External upgrades to the unit include the upgraded keypad, power cord clamp, mil-spec paint, and the case has an internal support structure to prevent denting if dropped. The display and microprocessor have been upgraded to operate in extreme sub-zero temperatures.

H-810DM

Excerpt - The RADēCO™ Model H-810DM (Defense Model) is a ruggedized version of the popular H-810AC. The H-810DM is designed to meet a variety of military standards and for use in extreme environments. This microprocessor based unit has our unique aluminum Tough Screen; no moving parts or buttons and operates like a touch screen phone only made of 1/4 inch thick aluminum with a polycarbonate display window. External upgrades to the unit include the upgraded keypad, power cord clamp, mil-spec paint, and the case has an internal support structure to prevent denting if dropped.

H-811

Excerpt - The RADēCO Model H-811 AC/DC is a dependable, lightweight high volume air sampler which can operate off 12 or 24VDC as well as 120 VAC. This microprocessor based high volume air sampler will operate virtually anywhere. The unit has a slip connector for powering off a car battery or a RADeCO RAD1224 Battery Pack as well as a removable AC power cord for when line power is available. This one unit can replace up to 6 air samplers. Three AC units with different calibrations and three DC units with three different calibrations.

Tripod TRP-2

Excerpt - The TRP-2 is a survey style Tripod which provides telescoping legs for varying sampling heights. The feet are rugged steel with sharp point for a solid gripping on a variety of surfaces. Constructed of lightweight Aluminum for ease- of portability with a solid cast aluminum head for years of reliability. The TRP-2 works with either the H-809 Series or the H-810 series of High Volume Grab Samplers. When ordering please specify which unit it will be used so the appropriate adapter plate/block can be provided. Constructed of lightweight Aluminum for ease- of portability with a solid cast aluminum head for years of reliability.

12/24 Battery Pack

Excerpt - For Emergency Response or routine sampling the 12/24 Battery Pack provides enough power for a wide variety of situations. It includes a heavy duty cable and slip connector or jumper cable clamps and is p0wered by two 12 volt sealed, lead-acid batteries. The 12 volt systems use the batteries in parallel and the 24 volt system in series. The DC outlet can power a variety of 12 volt accessories.

TRU-DAC Pro

Excerpt - The RADēCO TRU-DAC Pro Personal Alarming Alpha/Beta CAM, combines a very compact design with a high flow rate and long battery life. The unit measures long life Alpha and Beta emitting aerosols as well as Radon daughters by alpha spectroscopy and beta counting. A bright alpha numeric display and the clear keypad allow the operation even under harsh conditions. The integrated powerful charger recharges the unit within two hours.

RAD-Pro 10

Excerpt - The RADēCO RAD-Pro 10 is an industry leader in back-pressure performance, reliability and ease-of-use. This pump offers flow rates up to 10 LPM respectively. And thanks to several advanced features, this pump overcomes the main causes of sampling errors – saving you time and money. The air flow display holds calibration for 30 days, even with atmospheric changes. While RADeCO air sampling pumps are known for their strength, the back-pressure capabilities of the RAD-Pro 10 are the highest in the industry for any personal sampling pump.

RAD-Pro 5

Excerpt - The RADēCO RAD-Pro 5 personal air sampler (lapel sampler) is an industry leader in back-pressure performance, reliability and ease-of-use. This pump offers flow rates up to 5 LPM respectively. And thanks to several advanced features, this pump over-comes the main causes of sampling errors – saving you time and money.