Area, Personnel, Vehicle, and Portal Radiation Monitors

Radiation Portal Monitors (RPMs) are passive radiation detection devices used for the screening of individuals, vehicles, cargo or other vectors for detection of radioactive materials or radiation contamination. Fear of terrorist attacks with radiological weapons spurred RPM deployment for cargo scanning since 9/11, particularly in the United States. They are designed to detect traces of radiation emitted from an object passing through it. Most times, gamma radiation is detected, and in some cases the monitors are complemented by neutron detection when sensitivity for special nuclear material is desired.

Originally developed for screening individuals and vehicles at secure facilities such as weapons laboratories, radiation portals are now commonly used at scrap metal operations, foundries, land fills and recycling facilities to detect radiation sources incoming material to avoid radioactive sources illegally disposed in this way. RPMs are also deployed at civilian and military nuclear facilities to prevent theft of radiological materials.

As part of the effort to thwart nuclear smuggling after the breakup of the Soviet Union, the US Department of Energy deployed many RPMs worldwide as part of the Second Line of Defense Program in the late 1990s. After the attack of 9/11, the US Customs and Border Protection (CBP) started the Radiation Portal Monitor Program (RPMP) to deploy RPMs around all US borders.

Quick Index

Radiation Area Monitors

RDS-31 AM Area Monitor

RDS-31 AM Area Monitor

Excerpt - The RDS-31 AM Area Monitor was designed as an ALARA Tool for long term use in Locked High Rad Areas, to reduce entries and thus save time and dose. The concept for this product came from a need by a utility to monitor dose rates in steam affect Locked High Rad areas for a full 2 year fuel cycle utilizing battery power. The new SD version of the RDS-31 is expected to be able to transmit data twice a minute for a period of two years in dose rate of up to 1R/hr on battery power provided (without alarms).

More Information
RadEye Area Monitor

RadEye Area Monitor

Excerpt - The wall mounted RadEye Area Monitor extends the application range to convenient and cost-effective gamma and neutron area monitoring. In case of exceeding a preset threshold the system sets off an audible/optical alarm and the RadEye can be immediately used as a portable instrument. Area Monitor and flexible handheld instrument in one with no additional handheld instrument for locating the source is necessary.

More Information
FHT 6020 GN

FHT 6020 GN

Excerpt - The FHT6020 GN Area Neutron/Gamma Monitor has been developed to measure neutron dose rates and gamma dose rates with a sum channel using the Wide Energy Neutron Detector WENDI FHT762 that can measure Thermal to 5 GeV energy range according to H*(10), ICRP 74 in conjunction with an assortment of gamma dose rate probes.

More Information
CM 620

CM 620

Excerpt - The Rapiscan/TSA CM620 is a radiation monitor that automatically and covertly inspects hand-carried articles during X-ray screening at a security checkpoint. The CM620 unit, which contains the radiation detector(s) and electronics, is positioned below the conveyor at the entrance to the X-ray machine. Bags are inspected for radiation as they move on the conveyor over the monitor and into the scanner. A radiation alarm is signaled to the operator by bright lights.

More Information
Radiation Alert Radiation Area Monitor

Radiation Alert Radiation Area Monitor

Excerpt - The Radiation Alert Radiation Area Monitor uses state of the art touch screen technology and a stream lined design to create one of the most user friendly area monitors available. The user interface is an intelligent graphics display system featuring an integrated resistive touch screen, an easy to read five digit LED display, warning indicators for low and high radiation alarm levels, low battery, and instrument failure.

More Information
DRM Area Monitoring System

DRM Area Monitoring System

Excerpt - The DRM Area Monitoring System consists of various modules which are easily deployed depending on the monitoring application: detector unit, remote display, all-in detector and display unit and external battery. The DRM family integrates WRM2 Telemetry, Network connectivity, Cellular and GPS for flexibility in area radiation monitoring applications. Additional configurations include Environmental Enclosures, Solar Power, and MILSTD EMI, ESD and Temperature resistance.

More Information
DRM-1

DRM-1

Excerpt - The DRM-1 is a compact area radiation monitoring system offering unparalleled features for stand-alone or wireless area monitoring. The DRM is a portable or fixed position device for monitoring of perimeters or boundaries and quickly identify changing radiological conditions. With enhanced sensitivity, the DRM-1D provides is ideal for radiological monitoring in medical facility emergency rooms, incident site decontamination tents, etc. The versatility of the DRM provides for easy deployment on emergency response vehicles. The DRM can be configured for wireless (FHSS) transmission of radiological data or other communication process (air card, satellite, GPS, etc)

More Information
DRM-2

DRM-2

Excerpt - The DRM-2 is a compact, all-in-one area radiation monitoring system with display and alarm indicators. The DRM-2 offers unparalleled features for a stand-alone, TCP/IP networked (optional) or wireless area monitoring solutions. The DRM is a portable or fixed position device for monitoring of perimeters or boundaries and quickly identify changing radiological conditions. With enhanced sensitivity, the DRM-1D provides is ideal for radiological monitoring in medical facility emergency rooms, incident site decontamination tents, etc. The versatility of the DRM provides for easy deployment on emergency response vehicles.

More Information
AMP 50

AMP 50

Excerpt - The AMP-50 provides real-time remote radiological monitoring. Local readout of hand-held meter allows for use as a portable survey instrument. The AMP-50 is designed specifically to be used in medium to low dose rate fields. The AMP-50 features linear response from 10 μR/h to 4 R/h (0.1 μSv/hr to 40 mSv/hr).

More Information
AMP 100

AMP 100

Excerpt - The AMP-100 provides real-time remote radiological monitoring. Local readout of hand-held meter allows for use as a portable survey instrument. The AMP-100 is designed specifically to be used in high dose rate fields. The AMP-100 features linear response from 0.5 mR/h to 1000 mR/h (0.5 msv/hr to 10 sv/hr).

More Information
AMP 200

AMP 200

Excerpt - The AMP-200 provides real-time remote radiological monitoring. Local readout of hand-held meter allows for use as a portable survey instrument. The AMP-200 is designed specifically to be used in high dose rate fields. The AMP-200 features linear response from 5 R/hr to 10,000 R/hr (0.5 msv/hr to 100 sv/hr).

More Information
STRIDE 300

STRIDE 300

Excerpt - The STRIDE Series 300 stanchion detection units have been designed primarily for pedestrian security installations. The stanchion detection unit looks and works exactly the same as a standard crowd control stanchion. It has an extendable belt on top, the post and a weighted base. These units are available in wired or wireless versions.

More Information
Rad-DX

Rad-DX

Excerpt - The Rad-DX is a wireless mesh networked radiation detector with a sensitive scintillation detector which allows it to detect discreet sources of radiation in less than one second. Dual versions are available; with and without display. External audible and visual alarms are available for high noise and/or industrial applications. We also offer the Rad-DX SafeGuard model for harsh outdoor environments.

More Information
Rad-DX SafeGuard

Rad-DX SafeGuard

Excerpt - The Rad-DX SafeGuard is a state-of-the-art radiation area monitor that provides real-time detection, data collection, and location of radiation threats across any area. It is based on the Rad-DX wireless radiation area monitor. The SafeGuard is a mesh networked radiation detector with a sensitive scintillation detector which allows it to detect discreet sources of radiation in less than one second. SafeGuard incorporates the exclusive D-tect SensorNet mesh network, an automatic communication network that allows users to monitor a full network of Rad-DX SafeGuard devices.

More Information
GammaTRACER

GammaTRACER

Excerpt - The GammaTRACER is designed for continuous measuring, recording and optionally transmitting the environmental gamma dose rate – more than 3,000 probes in worldwide use The hermetically sealed probe, including the GM detectors as well as all electronic components, operates completely autonomously and is independent of any physical connections, thus resisting extreme climatic and environmental conditions. Energy-saving chip technology allows maintenance-free non-stop operation of the GammaTRACER probe of typically five years, optionally up to ten years.

More Information
GammaTRACER Spider

GammaTRACER Spider

Excerpt - The autonomous GammaTRACER Spider gamma probe is specially designed to cover the needs of first responders in an emergency scenario. Based on the proven GammaTRACER design, the probe provides reliable measurement of the gamma dose rate and wireless data transmission to the crisis center by using SkyLINK/ShortLINK radio or Iridium satellite modem. The compact design and innovative self-erecting enclosure facilitate deployment and minimize time, particularly important for emergency use and roll-out in contaminated area.

More Information
SpectroTRACER

SpectroTRACER

Excerpt - The intelligent SpectroTRACER probe is a continuous measurement system for detecting lowest gamma radiation in air and on the ground, but also excellently suited for high gamma radiation measurement. SpectroTRACER performs a spectrometric analysis of the measurement to identify the detected radionuclides. The device is used for gamma monitoring whenever a pure gamma dose rate monitor is not efficient enough or if it is necessary to qualify the nature of the gamma radiation.

More Information
RadHalo Dose Rate Monitor

RadHalo Dose Rate Monitor

Excerpt - Sensitive and accurate dose rate monitors that can also ID isotopes quickly and accurately, in any environment. The Thermo Scientific™ RadHalo RDP and FM detect and identify gamma and neutron radiation as well as provide accurate dose rate capability. With multiple configurations available RadHalo can adapt to any situation and budget from special event monitoring to rapid response for a nuclear power accident.

More Information

Personnel Portal Monitors

AM 801

AM 801

Excerpt - The AM 801 is a transportable radiation Portal Monitor. It is easily assembled by stacking the sections in less than five minutes with NO tools required. there are no cables or cable connections. It comes with Voice Operational Commands, Full Color Touch Sensitive graphics panel, and Auto Cal for Maximum Sensitivity. The audible and visual alarms meet or exceed FEMA's sensitivity requirements of 1uCi or less Cs-137 detection.

More Information
HFM11-SC Hand/Foot Monitor

HFM11-SC Hand/Foot Monitor

Excerpt - The HFM11-SC hand and foot monitor uses an established technique for monitoring alpha and beta radiation simultaneously. Sprung detectors clamp both sides of the hand monitor and monitor them simultaneously. The vertically mounted detectors minimize the risk of detector contamination, and the top-mounted occupancy sensors avoid blockages. Each foot detector utilizes two photomultiplier tubes in order to minimize the variation in efficiency across the area of the foot.

More Information
TPM 903B

TPM 903B

Excerpt - The Rapiscan/TSA TPM-903B is designed for rapid screening of personnel in the event of a radiation release. It provides early warning of hot spots, eg. On protective clothing, and has design features suited for monitoring radiation workers, vehicles or the public. The TPM-903B is lightweight and mobile to facilitate transport to its location, where it is easily installed within seconds. In use, the aperture accommodates walkers or wheelchairs, and can be adjusted to also accommodate vehicles.

More Information
iPCM-12

iPCM-12

Excerpt - The iPCM12 takes contamination personnel monitoring to a new level. The unique sculpted geometry utilized in the Thermo Scientific PCM2 is combined with the serviceability of the Thermo Scientific IPM9 and the breakthrough electronics of the Series 12 monitors. The iPCM12 utilizes 21 gas detectors in monitoring the body, hands, and feet. The detectors are split into 4 detection zones to minimize the background during monitoring, and achieve the best detection limits.

More Information
PM12

PM12

Excerpt - The PM12 gamma portal monitor breaks new ground in personnel monitoring. It provides a major improvement in sensitivity over similar instruments, thus leading to faster monitoring. The PM12 utilizes eight identical large gamma-sensitive plastic scintillation detectors to monitor personnel passing through the portal. Traffic flow can be either direction. Three detector assemblies are located in each side of the portal, with additional detectors to monitor the head and feet.

More Information
METOR Radiation Detector

METOR Radiation Detector

Excerpt - With the METOR Radiation Detector, people are automatically inspected for both metallic and radioactive materials as they walk through the unit. The user-friendly inspection operation is the same as for metal detection alone. Radiation inspection alarms are clearly signaled visually and audibly. The radiation detection option is available with a new Metor walk-through metal detector unit or as a field upgradeable enhancement to a deployed unit.

More Information
PM 700

PM 700

Excerpt - The Rapiscan/TSA PM700 automatically scans pedestrian traffic without the need for frequent calibration. They are intended for applications where the relatively low energy emissions from 235U and 239Pu are the main concern. They are currently in use at uranium enrichment plants, weapons manufacturing plants, weapons storage sites, nuclear laboratories, nuclear waste disposal and storage sites where detection of Special Nuclear Materials (SNM) is essential.

More Information
PM 702

PM 702

Excerpt - The Rapiscan/TSA PM702 personnel portal monitor was designed for monitoring applications that require less sensitivity or for situations that require a semi-portable monitor. While it has adequate sensitivity for security applications, it is primarily designed for use in hospitals, laboratories, and other locations where radioactive Special Nuclear Materials (SNM) need to be monitored.

More Information
PM 704

PM 704

Excerpt - The Rapiscan/TSA PM704 transportable personnel monitor is the solution of choice for temporary radiation inspection applications. It is ideal for inspecting people gathered at events, such as sporting venues, political conferences or government functions. First responders can quickly transport the PM704 to a site and be ready to inspect people for radiation contamination. It also serves as a backup pedestrian monitor when additional inspection capacity is needed.

More Information
XL-MED  Hand/Foot Monitor

XL-MED Hand/Foot Monitor

Excerpt - The HandFoot-Fibre™ monitors are used for contamination screening of hands, feet and cloths for alpha, beta and gamma radiation in circumstances which do not require a full body monitor. The monitors are also well-suited for mobile contamination screening. Two versions are available: HandFoot-Fibre™ XLwith optional alpha discrimination for the use in all nuclear environments and HandFoot-Fibre™ MED which features a particularly high sensitivity for nuclides used in medical applications.

More Information

Vehicle and Train Monitors

TM-850

TM-850

Excerpt - The Rapiscan/TSA TM-850 is designed to automatically scan railroad traffic without the need for frequent calibration. t is intended for applications where the relatively low energy emissions from 235U and 239Pu are the main concern. TM-850 consists of two self-contained, weather resistant pillars placed on either side of the railroad track to be monitored. Each pillar contains two plastic scintillator detectors, four neutron detector blocks, occupancy sensors, and an SCA-775 amplifier/controller.

More Information
VM 250/AG

VM 250/AG

Excerpt - The Rapiscan/TSA VM250 automatically screens vehicular traffic without the need for frequent calibration. High sensitivity allows the VM250 to be used at such as uranium enrichment plants, weapons manufacturing and storage plants, nuclear laboratories, and nuclear waste disposal and storage sites where detection of Special Nuclear Materials (SNM) is essential. The VM250 is designed for use in harsh environmental conditions.

More Information
RTM 910

RTM 910

Excerpt - The RTM 910 is a flexible system for the monitoring of vehicles, packages and people for radioactive materials and contamination under all environmental conditions. It is based on proven modules using the most modern technology, assuring accurate and reliable results. The RTM 910 was also designed for simple and easy use and maintenance. Installation can be performed without any special training or knowledge and the instructions are supported by computer software. System operation is also computer-controlled and user-friendly.

More Information
SPIR–Ident Vehicle Portal

SPIR–Ident Vehicle Portal

Excerpt - For the Identification of gamma sources and SNM material in vehicles and containers. The SPIR–Ident Vehicle Portal is the most advanced detector of the SPIR family, and a new concept for site or critical infrastructure protection against radiological threats, such intrusion of special nuclear materials (SNM) or radiological dispersion devices (RDD). The SPIR-Ident vehicle portal is intended for secondary screening as a compliment to plastic scintillation-based detection portals. The SPIR-Ident provides a cost and performance effective solution and alternative to dynamic «ASP’s» for vehicles and containers.

More Information
RC1000

RC1000

Excerpt - The entry level RC1000 series of radiation detection systems have been designed for lower density materials such as waste and light/bulky scrap metal. The vehicle size and type will help determine the appropriate detector panel size (34L or 69L). The RC1000 detection systems all utilize RadComm’s high quality specially prepare Polyvinyl Toluene (PVT) scintillators. The proprietary PVT design has been optimized to allow maximum light output during scintillation events. The RC1000 is based on “Rate-Meter” technology. This technology requires a minimal calibration on system startup.

More Information
RC17 WatchDog

RC17 WatchDog

Excerpt - The RC17 WatchDog Radiation Detection System was designed specifically for the waste, scrap and recycling industry to provide the absolute highest level of radioactive source detection in real-time for small to medium size weigh scale applications.

More Information
RC2W34

RC2W34

Excerpt - The RC2W34 Waste Radiation Detection System is a precise and innovative instrument specifically designed to detect radioactive material in a moving vehicle containing waste and scrap. The revolutionary design of the RC2W34 incorporates 20 years of engineering design and proven field application experience. The RC2W34 incorporates state-of-the-art components and software. The end-user will have a clear understanding of the RC2W34 operations without a background in computer science or physics.

More Information
RC2000

RC2000

Excerpt - The RC2000 Series provides an extremely high degree of detection capability for a wide range of radioactive elements commonly associated with scrap metal. The RC2000 Series utilizes proven signal processing alarm algorithms with a large volume of high grade specially prepared scintillation material. The detection system then incorporates a dual detector arrangement with high gain, low noise, photo multiplier tubes (PMT’s) and infrared vehicle presence sensors that enable the system to better focus on the specific background radiation levels as the vehicle travels between the detector panels.

More Information
RC4000

RC4000

Excerpt - The RC4000 Series of radiation detection systems have been specifically designed to detect radioactive materials contained in a moving vehicle loaded with scrap material. The system design is modular, flexible and customizable, offering multiple detector configurations to meet site specific applications. The RC4000 incorporates only the highest quality of components and software/hardware technology available today. The detector assemblies provide an extremely high degree of detection capability for a wide range of radioactive elements commonly associated with scrap metal. The detectors utilize large plastic scintillation panels that are sensitive to Ionizing radiation.

More Information
NeuSpec

NeuSpec

Excerpt - The RadComm NeuSpec Advanced Spectroscopic Radiation Vehicle Portal Monitor has been specifically designed to enhance a radiation detection systems ability to recognize interferences from specific Gamma energies which have adversely affected alarm thresholds. NeuSpec utilizes of series of advanced isotopic identification algorithms in conjunction with RadComm’s industry-leading and proven Region of Interest (R.I.O.) analyses, which have been successfully utilized in PVT based systems for more than 15 years.

More Information
RadLink Embedded Controller

RadLink Embedded Controller

Excerpt - The RadLink Embedded Controller supplied by RadComm provides power and control capabilities to the RadComm radiation detection system. The controller allows a display to be connected to either of the VGA ports on the back of the box. There are dual Gigabit Ethernet ports for Internet/network connectivity. The unit can be mounted to a wall if desired. Ethernet and wireless connectivity for online customer support and a standard data management that can store up to 180,500 scans a year (500 daily scan average).

More Information
SPIR-Ident

SPIR-Ident

Excerpt - The SPIR–Ident Vehicle Portal is the most advanced detector of the SPIR family, and a new concept for site or critical infrastructure protection against radiological threats, such intrusion of special nuclear materials (SNM) or radiological dispersion devices (RDD). The SPIR-Ident vehicle portal is intended for secondary screening as a compliment to plastic scintillation-based detection portals. The SPIR-Ident provides a cost and performance effective solution and alternative to dynamic «ASP’s» for vehicles and containers.

More Information
Mini Rad-V G2

Mini Rad-V G2

Excerpt - Recognizing elevated radiation levels and detecting radioactive materials has never been easier. The ultra-sensitive Mini Rad-V vehicle-mounted radiation detector takes the proven performance and reliability of the Mini Rad-D and Rad-D technology to new levels for first responders and those concerned with discovering unwanted radioactive materials. The next generation Mini Rad-V G2 vehicle mounted radiation detector takes the proven performance and reliability of the Mini Rad-D technology to new levels for all responders concerned with discovering unwanted radioactive materials and elevated radiation levels.

More Information

Specialty Monitors

AM806

AM806

Excerpt - The Model AM-806 is a ruggedized, industrial grade monitor that can be utilized to detect radioactive material. The 806 utilizes 2 large area plastic scintillators totaling 360 cubic inches to detect the movement of gamma emitting isotopes passing through doorways, entrance gates or other similar openings.

More Information
XRT-260

XRT-260

Excerpt - The Rapiscan/TSA package portal monitor, model XRT-260, is a highly reliable system for radiometric protection of special nuclear material (SNM). The package monitor system consists of two pillars which contain the sub-system modules. The pillars are mounted on either side of the conveyor belt. The pillars use lead shielding on the rear and sides of the detectors to reduce the background radiation and increase the ability of the system to detect SNM passing between the pillars.

More Information
PackEye FHT1377

PackEye FHT1377

Excerpt - The PackEye FHT1377 provides survey teams with a tool for effectively addressing the problems of orphaned sources, radiological contamination, and maliciously introduced sources. By virtue of the proprietary NBR-technology (Natural Background Rejection) extremely low contributions of artificial gamma radiation are quickly detected, despite much larger fluctuations of the natural gamma background radiation.

More Information
BM-286

BM-286

Excerpt - The Rapiscan/TSA BM286 is designed to screen items up to and including 55 gallon drums weighing up to 1,000 lbs for radioactive contamination and is ideal for monitoring prior to release from the facility. With an efficient and accurate go/no go analysis and typical scan times of one to three minutes, the BM286 waste monitor allows for cost effective waste management.

More Information
BM-285

BM-285

Excerpt - The Rapiscan/TSA BM285 is designed to screen medium-sized items for radioactive emissions and is ideal for monitoring prior to release from the facility. With an efficient and accurate go/no go analysis and typical scan times of one to three minutes, the BM285 waste monitor allows for cost effective waste management.

More Information
BM-185

BM-185

Excerpt - The Rapiscan/TSA BM185 is designed to scan small items (less than 1 ft.3) for radioactive emissions and is ideal for monitoring prior to release from the facility. With an efficient and accurate go/no go analysis and typical scan times of one to three minutes, the TSA BM185 waste monitor allows for efficient and cost effective waste management.

More Information
CM-267

CM-267

Excerpt - The Rapiscan/TSA CM267 is a stand-alone conveyor monitor which can be positioned on the side or mounted directly above a moving beltway. The CM267 features highly sensitive detection for both gamma and/or neutron radiation. The CM267 is intended for application in transportation centers where the relatively low energy emissions from 235U and 239Pu are the main concern. The CM267 high sensitivity conveyor monitor offers reliable operation in variable background environments. This system covers most conveyor belt applications, and can be adapted to meet specific requirements.

More Information
MD-134

MD-134

Excerpt - The Rapiscan/TSA MD134 is designed to automatically scan vehicles or containers without the need for frequent calibration. The system can be stationary to scan vehicles as they drive by or it can be mounted in a vehicle and driven past items to be scanned.

More Information
SPIR-Detect

SPIR-Detect

Excerpt - The SPIR-Detect is a new concept for site or critical infrastructure protection against radiological threat, like intrusion of special nuclear materials (SNM) or radiological dispersion devices (RDD). Based on a network of sensitive gamma/neutron detectors, that can be mobile, or permanently or temporary installed, the system features a discrete and centralized survey of access points, inside buildings or outside. SPIR-Detect is the perfect solution for people or luggage checking in airports, railway stations and in sensitive places during special events (e.g. sports or cultural).

More Information
RC17 WatchDog

RC17 WatchDog

Excerpt - The RC17 WatchDog Radiation Detection System was designed specifically for the waste, scrap and recycling industry to provide the absolute highest level of radioactive source detection in real-time for small to medium size weigh scale applications.

More Information
RC4000 – Conveyor

RC4000 – Conveyor

Excerpt - The RC4000 Conveyor Radiation Detection System consists of two main components - the RCD conveyor radiation detectors and RC4000 Control Console. RCD radiation detectors are mounted on the infeed conveyor to the shredder and downstream conveyor after the shredder. The RCD detectors are connected to the RC4000 console via a low voltage signal communication cable. The signal cable utilizes double-shielded, multiple twisted-pair conductors that carry low voltage DC power and logic levels that are virtually immune from electrical noise.

More Information
Cricket-LR

Cricket-LR

Excerpt - The Cricket-LR grapple mounted radiation detection system will provide the highest degree of detection capability for small low-level radioactive sources buried in scrap material. The system operates in three modes: continuous area scanning, selective grapple load scanning and a manual search-and-find scans. The Cricket is the only system of its kind in the world and has been proven to withstand the harsh environment of a scrap handling operation - regardless of the material being handled.

More Information
Cricket

Cricket

Excerpt - The Cricket radiation detection system is designed specifically to meet the needs of the scrap, steel and waste industries. The Cricket’s revolutionary, yet simple design provides an optimum level of detection capability for low intensity radioactive sources, on a continuous basis, in applications where radiation detection systems have never existed before. The level of detection capability will far exceed any conventional radiation detection system, including detection systems that are mounted on the boom of a crane, regardless of the detector size.

More Information
RC99 RadPASS

RC99 RadPASS

Excerpt - The RC99 RadPASS is designed to provide an economical and extremely robust system for covert radiation monitoring of vehicles at a permanent control points or for security operations at special events. The sensitive and durable Polyvinyl Toluene (PVT) sensors are concealed in our specially designed housing allowing for inconspicuous monitoring of radioactive material or threats.

More Information
SPIR-Ident

SPIR-Ident

Excerpt - The SPIR–Ident Vehicle Portal is the most advanced detector of the SPIR family, and a new concept for site or critical infrastructure protection against radiological threats, such intrusion of special nuclear materials (SNM) or radiological dispersion devices (RDD). The SPIR-Ident vehicle portal is intended for secondary screening as a compliment to plastic scintillation-based detection portals. The SPIR-Ident provides a cost and performance effective solution and alternative to dynamic «ASP’s» for vehicles and containers.

More Information
STRIDE 200

STRIDE 200

Excerpt - The STRIDE Series 200 detection units have been designed primarily for fixed wired installations. The cylinder shaped housing is made of aluminum and is both dust and moisture proof. The size of the housing depends on the size of the NaI scintillation detector chosen and the presence of an optional He3 neutron detector with moderator. These units can be mounted on walls, above doorways, behind reception desks, behind passport control counters, above luggage or parcel conveyer belts, and much more.

More Information
Mini Rad-V G2

Mini Rad-V G2

Excerpt - Recognizing elevated radiation levels and detecting radioactive materials has never been easier. The ultra-sensitive Mini Rad-V vehicle-mounted radiation detector takes the proven performance and reliability of the Mini Rad-D and Rad-D technology to new levels for first responders and those concerned with discovering unwanted radioactive materials. The next generation Mini Rad-V G2 vehicle mounted radiation detector takes the proven performance and reliability of the Mini Rad-D technology to new levels for all responders concerned with discovering unwanted radioactive materials and elevated radiation levels.

More Information
rad-D™

rad-D™

Excerpt - The Rad-D is a fixed-position radiation detector that is used to monitor doorways, driveways, or loading docks. It can inspect packages or luggage on conveyor belts; and it can be integrated with an X-ray machine or a metal detector to increase the kinds of dangers detected. The Rad-D can also be easily connected to an existing security system – to add radiation to the other types of alarms. The Rad-D is small. It can be attached to walls, light poles, convey-or belts, or X-ray machines. And because it is small, it doesn’t affect the how of vehicles or pedestrians under inspection. Other, similar devices need large, fixed areas and concrete footings to mount their systems and require traffic (vehicles or people) to be forced through a fixed inspection corridor. A Rad-D system can include up to four detectors – operating simultaneously, each up to 150’ away from the display electronics. The Rad-D is designed to integrate into existing security networks, using either a serial communications link or a Bluetooth wireless link that can communicate with a PC up to 300 feet away. With four detectors, an operator can monitor four different doorways (or driveways, or conveyor belts, etc.) anywhere in your facility. When the Rad-D alarms, it can trigger active responses such as blockades or halting conveyor belt.

More Information
rad-D PRM

rad-D PRM

Excerpt - The exclusive Rad-D PRM Mounting System makes installation of the rad-D very simple and straight forward. The PRM gives the detecting unit full directional adjustment capability. It can be mounted permanently to most surfaces or with our extremely robust magnet configuration, the unit can be affixed to any metal surface and then be transported to other locations for added flexibility. The PRM is the ideal solution for X-ray machines and package scanning

More Information
GammaTRACER Spider

GammaTRACER Spider

Excerpt - The autonomous GammaTRACER Spider gamma probe is specially designed to cover the needs of first responders in an emergency scenario. Based on the proven GammaTRACER design, the probe provides reliable measurement of the gamma dose rate and wireless data transmission to the crisis center by using SkyLINK/ShortLINK radio or Iridium satellite modem. The compact design and innovative self-erecting enclosure facilitate deployment and minimize time, particularly important for emergency use and roll-out in contaminated area.

More Information